Hey everyone! It’s Lindi, back again from Love Create Celebrate! I hope you’re all happily recovering from he hustle and bustle of the holiday season. I know I usually need a few weeks before I’m fully functional again! I’m starting off the New Year with a few simple home decor projects, which includes these modern triangle tea light holders. If you have some scrap 2x4s lying around, you can make these!
I’ve shared a couple of other scrap wood projects on here before, including the simple white-washed ornaments and some square napkin rings, but I can’t help it! It’s so easy to create something beautiful from a discarded piece of wood!
This post contains affiliate links. See disclosure page for more info.
Materials:
- Scrap 2×4″ board
- Mitre saw
- Drill
- 5/16″ brad point drill bit
- 1 1/2″ Forstner bit
- Sander
- Wood stain
Here’s how to make your own tea light candle holders:
Start by setting your mitre saw at a 45 degree angle. Cut straight from one corner on the 45. This will cut a triangle with two 3.5″ sides and a longer (almost 5″) hypotenuse (hello grade 9 math!).
Then you can bring your saw back to centre (90 degrees) and make a straight cut from the edge you just cut. This will cut a second triangle, exactly the same size as the first. Bonus of this project is that there is zero waste!
Keep repeating those steps until you have the number of triangles you want.
Use a speed square to draw a straight line in the centre of the triangle, then measure 1 1/8″ up from the flat edge of the line (above). This will be the centre that you drill into.
Drill a pilot hole into the centre that you just created using a 5/16″ brad point drill bit.
Then centre your foster bit over your pilot hole and drill down the height of a tea light. Ours was about the depth of the bit. If you use a drill press you can set it to the correct height. If you are using a drill, make sure the piece is clamped down well.
Finally, stain your candle holders in the wood stain of your choice :) I chose to use white wash and ebony stains because I love the contrast of black and white in my decor.
When I made these, I finished off my entire 2×4″ scrap board, which meant I had a few extras to give as gifts too. So far everyone who has received one has loved them!
Hope you liked the project! Would you use a different stain for yours? I’d love to hear your ideas!
The post Triangle Tea Light Holders appeared first on Ugly Duckling House.
from Ugly Duckling House https://www.uglyducklinghouse.com/triangle-tea-light-holders/
No comments:
Post a Comment