Friday, 29 June 2018

Just When I Thought I Had Things Under Control…

Sigh… owning a house is great and all, but when there’s a leak in your ceiling? Ugh. Here’s how to prevent and clear a clogged air conditioning drain line.

Going to tell you right now: this story isn’t quite finished yet. I found a temporary solution, but I’m more or less going ahead and posting this so that someone will run up to their attic and immediately take care of this, before you have to deal with a ceiling leak.

Let’s start with what we all know is never a good sign: the dreaded ceiling stain:

stain on living room ceiling

I knew it couldn’t be good. I’ll be partnering with a drywall brand later this fall, and while I was at their headquarters earlier this month (recap coming next week), I heard a quote that proved to be way too ominous:

When it comes to owning a house, it’s not a matter of IF you’ll have a moisture issue. It’s WHEN.

Little did I know how true that was about to be. I’ve always said that my house has a sass all its own, and once again, she interrupted my plans. It was as though my house overheard that quote and manifested an example so I could have a story ready to go. I didn’t want to do a tutorial on ceiling stains, but my house is like, “Drywall? Ok, I got you, boo. Check this out!”

But this, of course, isn’t the project I wanted to do this fall — it’s something else that’s way more exciting and cool.

Frig friggity frig-frig — freaking dammit.

Anyway, I saw the leak and at first thought it might be a sweating/condensation issue. It’s been raining practically EVERY DAY this summer and humid beyond belief. So, I figured that turning the A/C up when we went to visit K’s parents the other weekend might have created a problem, similar to how I learned that leaving the door open might freeze up my A/C (as it turns out, your childhood scolding wasn’t just a “bought air” issue). Working on the deck and shed, I’ve certainly noticed how soggy everything in general has been this summer.

Not to panic, I thought. I‘ll just monitor it and let it dry out. If it did, I could just cover over the stain and be done with it and have learned a lesson. I also had one of K’s brother’s visiting overnight at the time, so I was in a frenzy and really couldn’t spend time thinking on it.

(Which is obviously stupid, because ceiling leaks don’t give a damn about your schedule.)

The next day, it started to drip. And I knew immediately it was a bigger problem. So, I grabbed a tarp and a cardboard box and started cutting the ceiling open. I certainly know enough to handle a drywall patch, so it was more of trying to protect ruining the floor more than anything.

cutting hole in ceiling

To humor myself, I put a neglected plant underneath the drip to give the plant a little water. 😉 Lemons —-> lemonade.

watering plant with ceiling leak

After K and I investigated the drip a little more, we had to keep cutting a hole to find the source. I  suspected that the leak might be further away, since the stain was forming right along a drywall seam (which would make it a path-of-least-resistance type thing, where water would seep through a vulnerable spot, even if the drip behind it originates somewhere else). The leak was coming from inside the house a spot closer to the actual wall/joists, near a duct.

revealing duct work

It occurred to both of us: if you go straight up from this point, it’s between two walls and directly in line with the air conditioner in the attic. DAMMIT. The more I cut, the more it became a steady flow.

filled bucket with water

Tip: If the drip is splashing on your floor, drape a towel over the bucket.

After looking through a number of articles online, YouTube videos, speaking to my dad, and more, it seemed the most likely culprit was a clogged AC condensation line.

How to Prevent a Clog in Your Air Conditioner’s Condensate Drain Line

The purpose of an air conditioner’s condensate drain line is kind of in the name: to drain excess water. As the HVAC system does its thing, water is produced, and it needs a drip line to take that water from the HVAC system in the attic or basement and outside the home (you know, where it won’t leak through your ceiling). You can often locate the end of this drip line outside, near your A/C unit.

There’s also often an overflow line and a drip pan underneath the indoor HVAC system, so that in the case that the line gets clogged, it will fill the pan and reach the overflow line and still run out of the house. So, why did I still have this issue?

attic access

Unfortunately, this whole setup usually doesn’t get much love until there’s damage. Clogs and blockages form from algae and mold buildup. Metal drip pans can rust through. To prevent this buildup, it’s recommended to use distilled vinegar or bleach and pour it into the line at an access point (there’s usually a valve somewhere along the drain line where you can open it and pour it in). Doing so on a regular basis (a good time is every spring just before turning on the A/C for the first time),  you should have no problem. If you ever hear a gurgling, or bubbling sound behind your wall, this would be a good time to check too.

But get this: even if you hire someone to regularly service your HVAC system each year, this is commonly forgotten to be checked on. So first, you have to know about this to even ask the person if they checked it. Anyone see the problem with that???

How to Clear a Clogged Air Conditioning Drain Line

You Might Need

Steps

  1. Turn off the A/C power at the thermostat and the breaker.
  2. Locate the drip pan beneath the HVAC system. If it’s got standing water in it, you probably have a clog. Shop vac it out or use a towel to soak up the water. I sincerely doubt you will, but you should also clean the pan with soap while you’re at it.
  3. Go outside and locate the end of the drain opening. Use the shop vac again for a minute or two (put your hand around the valve and end of the shop vac if you want to improve suction, or use some super cheap dollar-store duct tape that never sticks well to anything when you want it to). You might hear debris getting sucked up, but check the shop vac’s contents if you’re not sure. You might also see some really gross sludge fall out of the line.
  4. Locate the access valve (if there is one). It will look like a T-shaped vent with a PVC cover. Using a funnel, small cup with a spout, or similar (I used a watering can with a really narrow mouth), pour a little distilled vinegar or bleach into the line.
  5. Allow it to sit for a little while (go watch an episode on Netflix & come back), then flush with water. Have someone outside on the phone with you when you do this to confirm if the line is now clear.
  6. If the above doesn’t work, you can try snaking the clog, blasting it with a canister of air (my dad does this), or calling a pro (hopefully a guy who will remember to check this for you the next time he services your system).

drain line gun

In my case, not only was my line clogged, but:

hvac condensate drain lines

  • My drip pan was rusted through in one spot. That’s what was causing it to leak in the house, because water wasn’t catching where it should have been.
  • Even if I had known about this prior, my drain line setup had no valve to pour anything into. While this might still work if you can remove the fitting on the edge of the drain pan, mine was stuck on tight and really awkward to move in its current layout. So, we had to cut the line and reroute the water flow temporarily into the overflow drain line.
  • Drain lines are recommended to be slightly titled at a downward angle to better assist with water flow. Guess what — nope.
  • There are a number of turns in mine, so the clog has been building up slowly for years.

What’s next:

As I mentioned, my tale is not quite over yet, but at least we have the A/C running and I’m confident we’ll be able to get this fixed. We’ll need to clear the clog and reroute the drain line back to normal, add an access valve, and replace the drip pan. We’ll probably also look into installing an overflow sensor in the overflow line, so we can be alerted in case it happens again (yay, technology!).

Oh yeah — and patch the hole in the living room ceiling. I’ll have that tutorial for you sometime in the future.

So, now you know! I hope this info someday helps someone prevent a clog and an expensive repair bill. If it does, please come back here and tell me so I know I prevented damage in the process of earning mine. 😉

bucket and towels

The post Just When I Thought I Had Things Under Control… appeared first on Ugly Duckling House.

More Where That Came From

How to Fix a Leaking Outdoor Faucet


from Ugly Duckling House https://www.uglyducklinghouse.com/how-to-clear-a-clogged-air-conditioning-drain-line/

Thursday, 21 June 2018

Mini Garden Deck | Scrap Deck Boards Made Useful

This “mini garden deck” made from scrap deck boards has already made a huge difference in keeping my feet dry around the new vegetable garden.

Hey everyone! As you saw from yesterday’s deck update, I’ve been spending a lot of time outside. Between that, the new vegetable garden, and the new shed build, I’ve been in a summer state of mind for quite some time. I’ve also kind of HAD IT with walking on muddy dirt patches (Georgia’s spring rains this year have been nuts!). With summer officially starting today, and with plenty of scrap deck boards around, I decided to hop in with the #scrapwoodchallenge and created my own solution for better garden maintenance. I’m calling it my “mini garden deck” 😎!

diy mini garden deck

My new vegetable garden bed has been a learning process. One part of that has been realizing that this area is going to get a lot of upkeep-related foot traffic.

green tomato

So, as proud as I am of how well things are going, I have noticed a major drawback: frequent visits have made the inner triangle of the L-shaped garden bed a little dirt-rich and grass-poor. I put down some landscaping fabric intending on eventually covering it with gravel, but then realized how well the leftover deck boards could solve the problem… without an additional materials purchase!

diy mini garden deck

Recommended Tools and Materials

may contain affiliate links

The deck boards I used are designated for Ground Contact, which is recommended for wood projects that sit within six inches of the ground. You can find more about that here.

How to make a mini garden deck from scrap wood

Start in the middle

Keeping in mind that this was scrap, I basically took the materials available. I bought stair balusters and wound up not needing them, and I’m kind of terrible about returning leftover materials. I used these as stringers for fastening the deck boards together. Many had been cut already to fit the floating deck (and therefore could not be returned), but some were long enough pieces where they could be reused.

stair balusters on landscaping fabric

Since I was kind of winging it, I placed the stair balusters on the ground, on top of the landscaping fabric and spread them out, fanning in a sort of triangle shape. These would be what I would screw the deck boards to. If you’ve ever seen a wooden sign and looked on the back, it’s a pretty similar concept (such as here and here).

basic concept of mini garden deck

I began where I thought would be the middle (ish) of the L-shaped area, and cut my deck board at 45-degree angles on both ends.

45 degree angles for mini deck

From this, I cut more pieces to help form a triangle shape until the space was filled. I dry fit each board into place and then began fastening them to the strips underneath.

dry fit of mini deck

Spacing

For spacing, I used some old plastic spacers I bought a long time ago for installing the laminate flooring in my house (just held onto them, because I just knew they’d be useful again 😉). If you don’t have something like this, insert a few nails between the boards — anything that will serve as a temporary wedge to provide a small gap. You’re mainly looking for spacing to allow the wood to expand and contract with moisture fluctuations.

spacing of first 4 middle boards

Screw together and fan out

I screwed in the first board on both ends where it met the stringers from the top down (2 screws on each end of the board, 2 screws down the middle). When the board was attached and spacing set, I moved the spacers to the next gap and fastened the next board. So on, and so on, until the entire triangle was complete.

using spacers

If you were to look at the back, it would look like a hot mess — the stringers (the stair balusters) that attach to the deck boards are practically random in their placement.

inside corner of mini deck

But since you’ll never see them, all that really matters is that they are enough material to hold the entire thing together. Since the ground was soft from the frequent rain, I merely needed to stand on it the new platform to sort squish into the ground and hold in place. The corner was kind of an awkward spot with how narrow it got, so working an extra piece of the baluster (vertically) into the corner was a perfect fit.

inner corner of mini deck

And boom: no more muddy feet when maintaining the garden. It actually kind of finishes the area nicely, too.

overall look of vegetable garden

There’s still a little more work to be done to make the widest end look more finished, but since I still have the shed build left to complete, I’ll wait to use up the remaining full-length deck boards before re-purposing one for the garden bed. This whole area is going to look so great!

I just love scrap wood projects… so feel free to do a little looking around at the links on this list. Jen from House of Wood asked a bunch of us to share some scrap ideas, and there’s LOTS more below!

Check out these other awesome Scrap Wood projects:

The post Mini Garden Deck | Scrap Deck Boards Made Useful appeared first on Ugly Duckling House.

More Where That Came From

How to Build a Concrete Form for an Outdoor Pad
The Gardenia Garden Beds Are Thriving!
Growing Seedlings for My First Veggie Garden
DIY Floating Deck, Part 1: Planning and Layout


from Ugly Duckling House https://www.uglyducklinghouse.com/diy-mini-garden-deck/